home *** CD-ROM | disk | FTP | other *** search
- *PPD-Adobe: "4.0"
- *% Adobe Systems PostScript(R) Printer Description File
- *% comment SUMOPSI2.PPD Created BY JING LEE 08/06/92
- *% Destinty WinPanel PostScript Printer Description File
- *% Copyright 1992, 1994 Destiny Technology Corporation. All Rights Reserved.
- *% Permission is granted for redistribution of this file as
- *% long as this copyright notice is intact and the contents
- *% of the file is not altered in any way from its original form.
- *FormatVersion: "4.0"
- *FileVersion: "2.3"
- *PCFileName: "SUMOPSI2.PPD"
- *LanguageVersion: English
- *Product: "(WinPanel)"
- *Product: "(Destiny WinPanel)"
- *PSVersion: "(52.3) 400"
- *PSVersion: "(52.3) 300"
- *PSVersion: "(52.3) 215"
- *ModelName: "NEC SuperScript PS2 200"
- *ShortNickName: "NEC SuperScript PS2 200"
- *NickName: "NEC SuperScript PS2 200"
-
- *% ==== Options and Constraints =====
- *OpenGroup: InstallableOptions/Options Installed
-
- *OpenUI *Option1/Optional Envelope Feeder: Boolean
- *DefaultOption1: False
- *Option1 True/Installed: ""
- *Option1 False/Not Installed: ""
- *CloseUI: *Option1
-
- *CloseGroup: InstallableOptions
-
- *UIConstraints: *Option1 False *InputSlot Envelope
- *UIConstraints: *PageSize Com10 *Duplex
- *UIConstraints: *PageSize Monarch *Duplex
- *UIConstraints: *PageSize DL *Duplex
- *UIConstraints: *PageSize C5 *Duplex
- *UIConstraints: *Duplex *PageSize Com10
- *UIConstraints: *Duplex *PageSize Monarch
- *UIConstraints: *Duplex *PageSize DL
- *UIConstraints: *Duplex *PageSize C5
- *UIConstraints: *PageRegion Com10 *Duplex
- *UIConstraints: *PageRegion Monarch *Duplex
- *UIConstraints: *PageRegion DL *Duplex
- *UIConstraints: *PageRegion C5 *Duplex
- *UIConstraints: *Duplex *PageRegion Com10
- *UIConstraints: *Duplex *PageRegion Monarch
- *UIConstraints: *Duplex *PageRegion DL
- *UIConstraints: *Duplex *PageRegion C5
-
- *% General Information and Defaults ===============
- *FreeVM: "524288"
- *LanguageLevel: "2"
- *Protocols: PJL
- *ColorDevice: False
- *DefaultColorSpace: Gray
- *VariablePaperSize: False
- *FileSystem: False
- *Throughput: "17"
- *Password: "0"
- *ExitServer: "
- count 0 eq { % is the password on the stack?
- true
- }{
- dup % potential password
- statusdict /checkpassword get exec not
- } ifelse
- { % if no password or not valid
- (WARNING : Cannot perform the exitserver command.) =
- (Password supplied is not valid.) =
- (Please contact the author of this software.) = flush
- quit
- } if
- serverdict /exitserver get exec
- "
- *End
- *Reset: "
- count 0 eq { % is the password on the stack?
- true
- }{
- dup % potential password
- statusdict /checkpassword get exec not
- } ifelse
- { % if no password or not valid
- (WARNING : Cannot reset printer.) =
- (Password supplied is not valid.) =
- (Please contact the author of this software.) = flush
- quit
- } if
- serverdict /exitserver get exec
- systemdict /quit get exec
- (WARNING : Printer Reset Failed.) = flush
- "
- *End
-
- *% Resolution Information ===============
- *DefaultResolution: 600dpi
- *%SetResolution 300dpi: "1 dict dup /HWResolution [300 300] put setpagedevice"
- *SetResolution 600dpi: "1 dict dup /HWResolution [600 600] put setpagedevice"
- *?Resolution: "
- save
- currentpagedevice /HWResolution get
- 0 get
- ( ) cvs print
- (dpi) = flush
- restore
- "
- *End
-
- *%OpenUI *Smoothing/RET: PickOne
- *%OrderDependency: 50 AnySetup *Smoothing
- *%DefaultSmoothing: Medium
- *%Smoothing None/Off: "0 statusdict /setdoret get exec"
- *%Smoothing Light: "1 statusdict /setdoret get exec"
- *%Smoothing Medium: "2 statusdict /setdoret get exec"
- *%Smoothing Dark: "3 statusdict /setdoret get exec"
- *%?Smoothing: "
- *%save
- *% [(None)(Light)(Medium)(Dark)(Unknown)] statusdict /doret get exec
- *% dup 3 gt{pop 4}if get = flush
- *%restore
- *%"
- *%End
- *%CloseUI: *Smoothing
-
- *% Halftone Information ===============
- *ScreenFreq: "85.0"
- *ScreenAngle: "45.0"
- *DefaultScreenProc: Dot
- *ScreenProc Dot: "
- {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
- sub }{dup mul exch dup mul add 1 exch sub }ifelse }
- "
- *End
- *ScreenProc Line: "{ pop }"
- *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
-
- *DefaultTransfer: Null
- *Transfer Null: "{ }"
- *Transfer Null.Inverse: "{ 1 exch sub }"
-
- *%Paper Handling ===================
- *%Use these entries to set paper size most of the time, unless there is
- *%specific reason to use PageRegion.
- *OpenUI *PageSize: PickOne
- *OrderDependency: 20 AnySetup *PageSize
- *PageSize Letter: "1 dict dup /PageSize [612 792] put setpagedevice"
- *PageSize Legal: "1 dict dup /PageSize [612 1008] put setpagedevice"
- *PageSize A4: "1 dict dup /PageSize [595 842] put setpagedevice"
- *PageSize Executive: "1 dict dup /PageSize [522 756] put setpagedevice"
- *PageSize Envelope.279.540/Monarch: "1 dict dup /PageSize [279 540] put setpagedevice"
- *PageSize Envelope.297.684/Com10: "1 dict dup /PageSize [297 684] put setpagedevice"
- *PageSize Envelope.459.649/C5 Env: "1 dict dup /PageSize [460 649] put setpagedevice"
- *PageSize Envelope.312.624/DL Env: "1 dict dup /PageSize [312 624] put setpagedevice"
- *%PageSize Envelope.B5: "1 dict dup /PageSize [499 708] put setpagedevice"
- *DefaultPageSize: Letter
- *?PageSize: "
- save
- currentpagedevice /PageSize get aload pop
- 2 copy gt {exch} if (Unknown)
- *%9 dict
- 8 dict
- dup [612 792] (Letter) put
- dup [612 1008] (Legal) put
- dup [595 842] (A4) put
- dup [522 756] (Executive) put
- dup [279 540] (Monarch) put
- dup [297 684] (Com10) put
- dup [460 649] (C5 Env) put
- dup [312 624] (DL Env) put
- *%dup [499 708] (Envelope.B5) put
- { exch aload pop 4 index sub abs 5 le exch 5 index sub abs 5 le and
- {exch pop exit } {pop} ifelse
- } bind forall = flush pop pop
- restore
- "
- *End
- *CloseUI: *PageSize
-
- *%These entries will set up the frame buffer. Usually used with manual feed.
- *OpenUI *PageRegion: PickOne
- *OrderDependency: 30 AnySetup *PageRegion
- *PageRegion Letter: "1 dict dup /PageSize [612 792] put setpagedevice"
- *PageRegion Legal: "1 dict dup /PageSize [612 1008] put setpagedevice"
- *PageRegion A4: "1 dict dup /PageSize [595 842] put setpagedevice"
- *PageRegion Executive: "1 dict dup /PageSize [522 756] put setpagedevice"
- *PageRegion Envelope.279.540/Monarch: "1 dict dup /PageSize [279 540] put setpagedevice"
- *PageRegion Envelope.297.684/Com10: "1 dict dup /PageSize [297 684] put setpagedevice"
- *PageRegion Envelope.459.649/C5 Env: "1 dict dup /PageSize [460 649] put setpagedevice"
- *PageRegion Envelope.312.624/DL Env: "1 dict dup /PageSize [312 624] put setpagedevice"
- *%PageRegion Envelope.B5: "1 dict dup /PageSize [499 708] put setpagedevice"
- *DefaultPageRegion: Letter
- *CloseUI: *PageRegion
-
- *%The following entries provide information about specific paper keywords.
- *DefaultImageableArea: Letter
- *ImageableArea Letter: "18 18 593 775"
- *ImageableArea Legal: "18 18 593 992"
- *ImageableArea A4: "18 23 577 819"
- *ImageableArea Executive: "18 17 505 740"
- *ImageableArea Envelope.279.540/Monarch: "18 13 279 527"
- *ImageableArea Envelope.297.684/Com10: "18 14 294 668"
- *ImageableArea Envelope.459.649/C5 Env: "18 12 454 634"
- *ImageableArea Envelope.312.624/DL Env: "18 13 309 608"
- *%ImageableArea Envelope.B5: "18 17 505 712 "
- *?ImageableArea: "
- save
- /cvp {( ) cvs print ( ) print } bind def
- newpath clippath pathbbox
- 4 -2 roll exch 2 {ceiling cvp} repeat
- wwexch 2 {floor cvp} repeat flush
- restore
- "
- *End
-
- *%These provide the physical dimensions of the paper (by keyword)
- *DefaultPaperDimension: Letter
- *PaperDimension Letter: "612 792"
- *PaperDimension Legal: "612 1008"
- *PaperDimension A4: "595 842"
- *PaperDimension Executive: "522 756"
- *PaperDimension Envelope.279.540/Monarch: "279 540"
- *PaperDimension Envelope.297.684/Com10: "297 684"
- *PaperDimension Envelope.459.649/C5 Env: "460 649"
- *PaperDimension Envelope.312.624/DL Env: "312 624"
- *%PaperDimension Envelope.B5: "499 708"
-
- *LandscapeOrientation: Plus90
- *OpenUI *InputSlot: PickOne
- *OrderDependency: 20 AnySetup *InputSlot
- *DefaultInputSlot: Hopper
- *InputSlot Hopper: "statusdict begin 0 settray end"
- *%InputSlot ManualFeed: "statusdict begin 1 settray end"
- *%InputSlot Envelope: "statusdict begin 2 settray end"
- *?InputSlot: "
- save
- [ (Upper) (ManualFeed) ] statusdict /papertray get exec
- {get exec} stopped { pop pop (Unknown)} if = flush
- restore
- "
- *End
- *CloseUI: *InputSlot
-
- *OpenUI *ManualFeed: Boolean
- *OrderDependency: 20 AnySetup *ManualFeed
- *DefaultManualFeed: False
- *ManualFeed True: "statusdict /manualfeed true put"
- *ManualFeed False: "statusdict /manualfeed false put"
- *?ManualFeed: "
- save
- statusdict /manualfeed get {(True)}{(False)}ifelse = flush
- restore
- "
- *End
- *CloseUI: *ManualFeed
-
- *OpenUI *OutputOrder: PickOne
- *OrderDependency: 50 AnySetup *OutputOrder
- *DefaultOutputOrder: Normal
- *OutputOrder Normal: "0 statusdict /setoutputtray get exec"
- *OutputOrder Reverse: "1 statusdict /setoutputray get exec"
- *?OutputOrder: "
- save
- [ (Normal) (Reverse) ] statusdict /outputtray get exec
- {get exec} stopped {pop pop (Unknown)} if = flush
- restore
- "
- *End
- *CloseUI: *OutputOrder
-
- *OpenUI *Duplex: PickOne
- *OrderDependency: 50 AnySetup *Duplex
- *DefaultDuplex: None
- *Duplex DuplexTumble: ""
-
- *End
- *Duplex DuplexNoTumble: ""
-
- *End
- *Duplex None: ""
-
- *End
- *?Duplex: ""
-
-
-
-
-
-
- *End
- *CloseUI: *Duplex
-
- *OpenUI *TraySwitch: Boolean
- *OrderDependency: 50 AnySetup *TraySwitch
- *DefaultTraySwitch: False
- *TraySwitch True: "true statusdict /settrayswitch get exec"
- *TraySwitch False: "false statusdict /settrayswitch get exec"
- *?TraySwitch: "
- save
- statusdict /trayswitch get exec {(True)}{(False)}ifelse = flush
- restore
- "
- *End
- *CloseUI: *TraySwitch
-
- *% Font Information =====================
- *DefaultFont: Courier
- *Font AvantGarde-Book: Standard "(001.002)" Standard ROM
- *Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM
- *Font AvantGarde-Demi: Standard "(001.003)" Standard ROM
- *Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM
- *Font Bookman-Demi: Standard "(001.001)" Standard ROM
- *Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM
- *Font Bookman-Light: Standard "(001.001)" Standard ROM
- *Font Bookman-LightItalic: Standard "(001.001)" Standard ROM
- *Font Courier: Standard "(002.002)" Standard ROM
- *Font Courier-Bold: Standard "(002.002)" Standard ROM
- *Font Courier-BoldOblique: Standard "(002.002)" Standard ROM
- *Font Courier-Oblique: Standard "(002.002)" Standard ROM
- *Font Helvetica: Standard "(001.006)" Standard ROM
- *Font Helvetica-Bold: Standard "(001.007)" Standard ROM
- *Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
- *Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
- *Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
- *Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
- *Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
- *Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
- *Font NewCenturySchlbk-Bold: Standard "(001.008)" Standard ROM
- *Font NewCenturySchlbk-BoldItalic: Standard "(001.006)" Standard ROM
- *Font NewCenturySchlbk-Italic: Standard "(001.005)" Standard ROM
- *Font NewCenturySchlbk-Roman: Standard "(001.006)" Standard ROM
- *Font Palatino-Bold: Standard "(001.005)" Standard ROM
- *Font Palatino-BoldItalic: Standard "(001.005)" Standard ROM
- *Font Palatino-Italic: Standard "(001.005)" Standard ROM
- *Font Palatino-Roman: Standard "(001.005)" Standard ROM
- *Font Symbol: Special "(001.003)" Special ROM
- *Font Times-Bold: Standard "(001.007)" Standard ROM
- *Font Times-BoldItalic: Standard "(001.009)" Standard ROM
- *Font Times-Italic: Standard "(001.007)" Standard ROM
- *Font Times-Roman: Standard "(001.007)" Standard ROM
- *Font ZapfChancery-MediumItalic: Standard "(001.003)" Standard ROM
- *Font ZapfDingbats: Special "(001.002)" Special ROM
- *?FontQuery: "
- save
- /str 100 string dup 0 (fonts/) putinterval def
- {
- count 1 gt
- {
- exch dup str 6 94 getinterval cvs
- (/) print print (:) print
- FontDirectory exch known
- {(Yes)}{(No)} ifelse =
- }
- {exit} ifelse
- }bind loop
- (*) = flush
- restore
- "
- *End
-
- *?FontList: "
- save
- FontDirectory { pop == } bind forall flush
- (*) = flush
- restore
- "
- *End
-
- *% Printer Messages (verbatim from printer):
- *Message: "%%[ exitserver: permanent state may be changed ]%%"
- *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
- *Message: "\FontName\ not found, using Courier"
-
- *% Status (format: %%[ status: <one of these> ]%% )
- *Status: "idle"
- *Status: "busy"
- *Status: "waiting"
- *Status: "printing"
- *Status: "warming up"
- *Status: "PrinterError: Out Of Paper"
- *Status: "PrinterError: Cover Open"
- *Status: "PrinterError: Feed Manual"
- *Status: "PrinterError: Paper Jam"
- *Status: "PrinterError: Miscellaneous Error"
- *Status: "PrinterError: Fatal Error"
-
- *% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
- *Source: "serial9"
- *Source: "serial25"
- *Source: "AppleTalk"
- *Source: "Centronics"
-
- *% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
- *PrinterError: "Out Of Paper"
- *PrinterError: "Cover Open"
- *PrinterError: "Feed Manual"
- *PrinterError: "Paper Jam"
- *PrinterError: "Miscellaneous Error"
- *PrinterError: "Fatal Error"
-
- *%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
-
- *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
-
- *InkName: ProcessBlack/Process Black
- *InkName: CustomColor/Custom Color
- *InkName: ProcessCyan/Process Cyan
- *InkName: ProcessMagenta/Process Magenta
- *InkName: ProcessYellow/Process Yellow
-
- *% For 60 lpi / 300 dpi ===============================
-
- *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
- *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
- *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
- *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
- *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
-
- *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
- *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
- *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
- *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
- *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
-
- *% For 53 lpi / 300 dpi ===============================
-
- *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
- *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
- *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
- *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
- *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
-
- *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
- *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
- *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
- *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
- *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
-
- *% For "NEC SuperScript PS 200"
- *% Produced by "BuildPPD.ps" version 3.0 edit 58
- *% Converted to meet 4.0 specification
- *% Last Edit Date: Sep 27 1994
- *% The byte count of this file should be exactly 014450 or 014884
- *% depending on the filesystem it resides in.
- *% end of PPD file for "NEC SuperScript PS 200"